Misc stuff

Link

Username: Cisco

Password: Cisco

Resetting to the Default Configuration

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory defaults using the MODE button:

Step 1 Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the access point.

Step 2 Press and hold the MODE button while you reconnect power to the access point.

Step 3 Hold the MODE button until the Status LED turns amber (approximately 2 to 3 seconds), and release the button.

Step 4 After the access point reboots, you must reconfigure the access point by using the Web browser interface, the Telnet interface, or Cisco IOS commands.

Note The access point is configured with the factory default values including the IP address (set to receive an IP address using DHCP).

pswdrec_6xx.pdf